Valve tapping bridge for plastic pipe (PE or PVC) DN 50-200 with lateral outlet
More information
Valve tapping bridge with service shut-off and for tapping 1½“ - 2“. The combination rubber insert between valve and pipe is chambered and has three sealing collars. The tapping must be closed with auxiliary shut-off via the side outlet and sealed after tapping until the valve bonnet is reattached. One bonnet with matching counter clamp is required for each dimension. The sealing material complies with the KTW recommendations of the UBA and the requirements of DVGW Worksheet W 270.
Area of application
- for plastic pipe (PE or PVC) DN 50 - 200
- for lockless, upper tapping under pressure by means of auxiliary shut-off
- for water up to PN 16